EDP 30pin LCD LED TEST TOOL KIT SET panel tester kit for repair Screen Monitor. How to Use the panel tool as Below. Please make sure your Panel Resoultion , Power for the Panel and Backlight that you need to Test. Such as NV156FHM-N31 we Need to Know the Resolution 1920X1080 , the Connector is 30pin 2Lanes EDP connector and the power is 3.3V supply 2.Connect the Power to the Panel tester , the power input is 12V-3A or 12V-5A DC port 2.5MM and 5.5MM inner + outside - 3. Press S1 or S2 set The resolution , such as the 1920X1080 , you need to set the display on 17. Choose the Panel supply Voltage , Press S5 , but on normally the Most of EDP panel work power is 3.3V , so there no need to change 5. Connect the LVDS cable and the Backlight Line. Press the power , then the LED Light.
Press the Up or Down test the Panel. After test finished, Power off. 2018 New Test panel Tool Tester. 1X 30pin LVDS cable for EDP panel. HOW To USE it AS BELOW.
Below shows how to use the Panel test tool. Now we take the NV156FHM-N31 for example. We check the panel all information as below.
The item "EDP 30pin LCD LED TEST TOOL KIT SET panel tester kit for repair Screen Monitor" is in sale since Wednesday, July 24, 2019. This item is in the category "Computers/Tablets & Networking\Laptop & Desktop Accessories\Screen Protectors". The seller is "oupin6" and is located in Shenzhen. This item can be shipped to North, South, or Latin America, all countries in Europe, all countries in continental Asia, Australia.